Tamiya 60319 Supermarine Spitfire MK.IXC 1/32
Product Description
Description
The Wait is Over!
The legendary Spitfire was the representative British fighter of WWII and many served with various air forces well into the 1950s. Among these was the Mk.IX, a variant powered by the Rolls-Royce Merlin 60 series engine which was developed to counter the Luftwaffe's Fw 190. Most of the Mk.IX aircraft came equipped with the C wing, two 20mm cannons, and four 7.7mm machine guns. The Mk.IXc, which was issued to units in July 1942, featured a top speed of 669.46 km/h and had superior maneuverability. The Mk.IXc not only helped the RAF regain air superiority over the English Channel, but it was also the second most produced Spitfire variant with 5,500 built. They were the RAF's main fighter for the latter half of the war.
About the Model
1/32 scale plastic assembly kit of the Spitfire Mk.IXc.
Overall Length: 302mm, Overall Width: 352mm.
2 kinds of parts for top and bottom engine cowlings, wingtips, rudder, and elevators included.
Features moveable ailerons. Flaps can be depicted in either up or down position.
Comes with 3 kinds of markings including one to depict the aircraft piloted by RAF ace Johnnie Johnson.
Construction Type Assembly kit
Decals Included
Photo-Etch Parts Included
Required To Complete Cement, Paint and Finishing Supplies
Scale 1/32
Special Feature 1 1/32 scale assembly kit. This is the most accurate Spitfire MK.IX model currently available in any scale
Special Feature 2 This model is a totally new design and has nothing in common with any other Tamiya Supermarine Spitfire models
Special Feature 3 Challenging model production technology limits, the engine cowlings have an amazing 0.4mm thickness to allow for a fully accurate scale representation of the engine. These cowlings can be installed and removed thanks to small magnets
Special Feature 4 The C Wing with its two 20mm cannons and four 7.7mm machine guns is faithfully reproduced
Special Feature 5 The details of the Rolls Royce Merlin engine including oil tanks, and supercharger have been faithfully remodeled
Special Feature 6 Movable elevators, rudder, and ailerons. Flaps can be depicted in up or down position
Special Feature 7 Landing gear parts included to depict either up or down position (interchangeable)
Special Feature 8 Photo-etched parts to depict details such as wheel covers, cockpit details including instrument panel (early / late) and seat belts with or without pilot
Special Feature 9 1 seated and 1 standing pilot figure are included
Special Feature 10 3 kinds of markings including those for RAF's top ace Johnnie Johnson and a color finishing guide included
The Wait is Over!
The legendary Spitfire was the representative British fighter of WWII and many served with various air forces well into the 1950s. Among these was the Mk.IX, a variant powered by the Rolls-Royce Merlin 60 series engine which was developed to counter the Luftwaffe's Fw 190. Most of the Mk.IX aircraft came equipped with the C wing, two 20mm cannons, and four 7.7mm machine guns. The Mk.IXc, which was issued to units in July 1942, featured a top speed of 669.46 km/h and had superior maneuverability. The Mk.IXc not only helped the RAF regain air superiority over the English Channel, but it was also the second most produced Spitfire variant with 5,500 built. They were the RAF's main fighter for the latter half of the war.
About the Model
1/32 scale plastic assembly kit of the Spitfire Mk.IXc.
Overall Length: 302mm, Overall Width: 352mm.
2 kinds of parts for top and bottom engine cowlings, wingtips, rudder, and elevators included.
Features moveable ailerons. Flaps can be depicted in either up or down position.
Comes with 3 kinds of markings including one to depict the aircraft piloted by RAF ace Johnnie Johnson.
Construction Type Assembly kit
Decals Included
Photo-Etch Parts Included
Required To Complete Cement, Paint and Finishing Supplies
Scale 1/32
Special Feature 1 1/32 scale assembly kit. This is the most accurate Spitfire MK.IX model currently available in any scale
Special Feature 2 This model is a totally new design and has nothing in common with any other Tamiya Supermarine Spitfire models
Special Feature 3 Challenging model production technology limits, the engine cowlings have an amazing 0.4mm thickness to allow for a fully accurate scale representation of the engine. These cowlings can be installed and removed thanks to small magnets
Special Feature 4 The C Wing with its two 20mm cannons and four 7.7mm machine guns is faithfully reproduced
Special Feature 5 The details of the Rolls Royce Merlin engine including oil tanks, and supercharger have been faithfully remodeled
Special Feature 6 Movable elevators, rudder, and ailerons. Flaps can be depicted in up or down position
Special Feature 7 Landing gear parts included to depict either up or down position (interchangeable)
Special Feature 8 Photo-etched parts to depict details such as wheel covers, cockpit details including instrument panel (early / late) and seat belts with or without pilot
Special Feature 9 1 seated and 1 standing pilot figure are included
Special Feature 10 3 kinds of markings including those for RAF's top ace Johnnie Johnson and a color finishing guide included